5 MWh Liquid-Cooled BESS
- 2.5 MW / 5.0 MWh nominal system
- 314 Ah LFP cells
- 1,165–1,500 VDC
- Liquid thermal management
- Gas + water fire suppression
- −20 to +50 °C · C3 anti-corrosion
IPXCOM · POWER SOLUTIONS
Power that holds
when the grid doesn’t.
Utility-scale battery containers, liquid-cooled C&I cabinets and high-output solar, engineered and field-supported by IPXCOM with technology from Sunpal, a lithium-storage manufacturer since 2008.
WELLPADSTELECOM / VSATSCADAMINING / PORTSDESALINATION / DATA CENTERSCAMPSHOSPITALS
INDUSTRIAL TOP 10
Storage and generation
for Venezuela and the Middle East.
Chosen for Venezuela and Middle East operating contexts including unstable grids, diesel displacement, extreme heat, dust and remote sites. Battery systems use LFP (lithium iron phosphate) chemistry, a mainstream lithium chemistry used for hot-climate applications. Suitability depends on site conditions, local approvals, ambient derating, transport, service access and final project design. Final configuration, derating and suitability are confirmed per project.
2.5 MW / 5 MWh Container
- LFP chemistry
- Parallel to multi-MWh plants
- Integrated PCS, BMS, EMS
- Peak shaving & grid services
1.86 MW / 3.72 MWh Integrated ESS
- Liquid cooling
- Two-hour discharge
- Scales in parallel
- Frequency & voltage support
1 MW / 2.15 MWh C&I Container
- LFP · 716.8 V battery strings
- 2 × 500 kW hybrid PCS
- Integrated fire suppression
- Separate 2 MW/4 MWh and 5 MW/10 MWh configurations available for project review
500 kW / 1,075 kWh BESS Container
- LFP chemistry
- Plug-and-play delivery
- Backup + peak shaving modes
- Remote monitoring
Monet-215CL Liquid-Cooled Cabinet
- 215 kW · 418 kWh nominal cabinet
- 8,000 cycles to 70% SOH
- −30 to +55 °C operation
- IP54 cabinet · IP67 battery pack
- Aerosol fire protection
- PCS up to 98% efficient
Monet-125CL Hybrid PV Cabinet
- 125 kW / 261 kWh nominal hybrid cabinet
- 100 kW PV input built in
- −25 to +60 °C; derates above 45 °C
- IP55 · liquid-cooled
- Isolation transformer, 400 V 3-phase
- Up to 3,000 m altitude
IP65 Outdoor Energy Cabinet
- 100 kW / 215 kWh nominal outdoor cabinet
- LFP · integrated PCS + BMS
- IP65 dust and water-jet rated
- Factory pre-wired and tested
- App and web monitoring
09HV Rack Battery System
- 100–241 kWh nominal series options
- Sizes: 100 · 157 · 200 · 215 · 225 · 241 kWh
- Pairs with 50–500 kW hybrid PCS
- 6,500+ cycles
- IEC 62619 · UN38.3 · CE
10720 W Bifacial Dual-Glass Module
- 700–720 W · SP720M-66H series
- TOPCon / HJT options per source literature
- Bifacial, dual glass
- 2384 × 1303 × 33 mm · 37.8 kg
- 25-year warranty
- Factory-direct volume supply
Specifications from Sunpal published datasheets and product literature; final ratings, derating, availability and system fit are confirmed per project in the IPXCOM engineering proposal.
SMALLER BUILDINGS
The same chemistry, sized for
offices, clinics, shops and homes.
IPXCOM-branded lithium storage from 5 kWh to 51 kWh, paired with IP65 hybrid inverters. Stack modules as loads grow; each unit can report through the same monitoring approach used across the industrial fleet.
IPXCOM HV Stack
- 20–51 kWh · LP-RH2 series
- 204.8–512 V high-voltage stack
- 6,500 cycles @ 90% DOD
- 5 or 10-year warranty
IPXCOM Floor HV
- 14–38 kWh · LP-RH1 series
- 144–384 V modular
- IP54 floor install
- SOC, cell-level monitoring
IPXCOM Wall Series
- 5–16 kWh · LP-Y4, 51.2 V
- 100 / 200 / 280 / 314 Ah
- 15 units in parallel
- UL1642 · IEC 62619 · UN38.3
All-in-One ESS
- 5–30 kWh storage range
- 5 or 10 kW pure sine wave
- Built-in MPPT, off-grid / hybrid
- 6 HP motor-start capability
IP65 Hybrid Inverters
- 5–12 kW · 48 V / 220 V
- IP65 outdoor rated
- Parallel up to 6 units
- Grid, solar, battery, generator
3-Phase HV Hybrid
- 15–25 kW · 220 / 380 V
- Low- and high-voltage models
- Parallel up to 10 units
- IP65 enclosure
FIELD DELIVERY
Hardware is half of it.
Keeping it running is the rest.
For 25 years IPXCOM has kept satellite, SCADA and telecom systems alive in oil fields and remote sites. Power is the same discipline.
Site survey & sizing
Load profiling, generator audit and solar resource study before a single panel ships.
SCADA integration
BMS and PCS data into existing SCADA, RTU and alarm systems over Modbus, CAN or Ethernet.
VSAT remote monitoring
Satellite backhaul so remote cabinets report 24/7 from wellheads, towers and camps.
Commissioning & O&M
Field engineers on the ground in-country for install, start-up, spares and service contracts.
SIZE A SYSTEM FOR YOUR SITE
Send a load profile,
generator log or location.
Our engineers return a sizing, a single-line and a delivered-cost proposal.